Premium Turquoise Fletch Type 1
The Patent-Pending Fletch Feather Holder just got an upgrade — larger premium turquoise!
This Fletch Feather Holder will fit onto hat bands 1/2” – 1” wide.
This type tab goes behind the hat band and bends over the top to clamp (see last photo).
Please Note: this feather IS NOT included. I will include a turkey wing feather with your Fletch free of charge (upon request). But this premium exotic Yucatán Ocellated Turkey Feather is for photo reference only.
If you are interested in sourcing a premium exotic feather or turkey feather from me, send me an email and I’ll send you pictures of what I have available.
Stone Mountain Turquoise — blue with tan matrix.
*** Feathers Sold Separately ***
The Fletch is a handmade sterling silver feather holder that attaches to hat bands. There are 2 types.
This Listing is for the Fletch Type 1.
Feather Size Disclaimer: If you choose to use your own feather, be aware that the Fletch diameter is not one-size-fits-all, and your feather might not fit. The Fletch is designed to accommodate medium-to-larger feathers (such as turkey tail feathers) with a quill that is 4.5 mm - 5 mm in diameter. That typically means a feather that is 10” - 12” long.
The Fletch Type 1 is for hat bands that are 1/2” or wider. Please only purchase this type if you have a hat band that is at least 1/2” wide.
For the thinner factory-stock hat bands (the ones that come on cowboys hats directly off the rack and are tied on the side OR have a 3-piece buckle set) please purchase the Fletch Type 2.
Again, please note that the Fletch Type 1 is for wider hat bands like leather bands, tall ribbons, and beaded bands. These bands are typically between 0.5 inches to 2 inches tall. Fletch Type 1 has a tab that goes behind your tall hat band and bends down over the top to create a clamp “C” around the band from the back side.
Fletch Type 1 is meant to go on and stay on. It is NOT meant to be switched among multiple hats. The Fletch type one can be removed and re-attached once or twice. However, sterling silver can only be bent back and forth a few times before it breaks. Don’t break your Fletch.
For thinner hat bands that tie on the side, please see the listing for Fletch Type 2.
The Patent-Pending Fletch Feather Holder just got an upgrade — larger premium turquoise!
This Fletch Feather Holder will fit onto hat bands 1/2” – 1” wide.
This type tab goes behind the hat band and bends over the top to clamp (see last photo).
Please Note: this feather IS NOT included. I will include a turkey wing feather with your Fletch free of charge (upon request). But this premium exotic Yucatán Ocellated Turkey Feather is for photo reference only.
If you are interested in sourcing a premium exotic feather or turkey feather from me, send me an email and I’ll send you pictures of what I have available.
Stone Mountain Turquoise — blue with tan matrix.
*** Feathers Sold Separately ***
The Fletch is a handmade sterling silver feather holder that attaches to hat bands. There are 2 types.
This Listing is for the Fletch Type 1.
Feather Size Disclaimer: If you choose to use your own feather, be aware that the Fletch diameter is not one-size-fits-all, and your feather might not fit. The Fletch is designed to accommodate medium-to-larger feathers (such as turkey tail feathers) with a quill that is 4.5 mm - 5 mm in diameter. That typically means a feather that is 10” - 12” long.
The Fletch Type 1 is for hat bands that are 1/2” or wider. Please only purchase this type if you have a hat band that is at least 1/2” wide.
For the thinner factory-stock hat bands (the ones that come on cowboys hats directly off the rack and are tied on the side OR have a 3-piece buckle set) please purchase the Fletch Type 2.
Again, please note that the Fletch Type 1 is for wider hat bands like leather bands, tall ribbons, and beaded bands. These bands are typically between 0.5 inches to 2 inches tall. Fletch Type 1 has a tab that goes behind your tall hat band and bends down over the top to create a clamp “C” around the band from the back side.
Fletch Type 1 is meant to go on and stay on. It is NOT meant to be switched among multiple hats. The Fletch type one can be removed and re-attached once or twice. However, sterling silver can only be bent back and forth a few times before it breaks. Don’t break your Fletch.
For thinner hat bands that tie on the side, please see the listing for Fletch Type 2.
The Patent-Pending Fletch Feather Holder just got an upgrade — larger premium turquoise!
This Fletch Feather Holder will fit onto hat bands 1/2” – 1” wide.
This type tab goes behind the hat band and bends over the top to clamp (see last photo).
Please Note: this feather IS NOT included. I will include a turkey wing feather with your Fletch free of charge (upon request). But this premium exotic Yucatán Ocellated Turkey Feather is for photo reference only.
If you are interested in sourcing a premium exotic feather or turkey feather from me, send me an email and I’ll send you pictures of what I have available.
Stone Mountain Turquoise — blue with tan matrix.
*** Feathers Sold Separately ***
The Fletch is a handmade sterling silver feather holder that attaches to hat bands. There are 2 types.
This Listing is for the Fletch Type 1.
Feather Size Disclaimer: If you choose to use your own feather, be aware that the Fletch diameter is not one-size-fits-all, and your feather might not fit. The Fletch is designed to accommodate medium-to-larger feathers (such as turkey tail feathers) with a quill that is 4.5 mm - 5 mm in diameter. That typically means a feather that is 10” - 12” long.
The Fletch Type 1 is for hat bands that are 1/2” or wider. Please only purchase this type if you have a hat band that is at least 1/2” wide.
For the thinner factory-stock hat bands (the ones that come on cowboys hats directly off the rack and are tied on the side OR have a 3-piece buckle set) please purchase the Fletch Type 2.
Again, please note that the Fletch Type 1 is for wider hat bands like leather bands, tall ribbons, and beaded bands. These bands are typically between 0.5 inches to 2 inches tall. Fletch Type 1 has a tab that goes behind your tall hat band and bends down over the top to create a clamp “C” around the band from the back side.
Fletch Type 1 is meant to go on and stay on. It is NOT meant to be switched among multiple hats. The Fletch type one can be removed and re-attached once or twice. However, sterling silver can only be bent back and forth a few times before it breaks. Don’t break your Fletch.
For thinner hat bands that tie on the side, please see the listing for Fletch Type 2.